Skip to main content

Ordering Codes

The STICKER platform is built on a modular hardware architecture. Each product variant is composed of specific interchangeable components, such as the mainboard, NFC board, enclosure type, and sensors.

For detailed technical specifications of the hardware, please refer to the Hardware Description page.

The lists below detail the ordering codes (part numbers) for the individual hardware components that constitute each STICKER variant. This information is useful for verifying your device configuration or identifying specific replacement parts.

STICKER Clime​

The hardware of this variant consists of the following ordering codes:

  • STICKER M – Standard mainboard
  • STICKER NFC – NFC board
  • ENC-STICKER-CLIME – Enclosure with two light pipes and perforation
  • 2× ENERGIZER-AA-1.5V-LITHIUM

STICKER Input 1​

The hardware of this variant consists of the following ordering codes:

  • STICKER M – Standard mainboard
  • STICKER NFC-INPUT – NFC board with connector
  • ENC-STICKER-INPUT-1 – Enclosure with light pipe and cable gland
  • 2× ENERGIZER-AA-1.5V-LITHIUM

STICKER Input 2​

The hardware of this variant consists of the following ordering codes:

  • STICKER M – Standard mainboard
  • STICKER NFC-INPUT – NFC board with connector
  • ENC-STICKER-INPUT-2 – Enclosure with light pipe and two cable glands
  • 2× ENERGIZER-AA-1.5V-LITHIUM

STICKER Motion​

The hardware of this variant consists of the following ordering codes:

  • STICKER M – Standard mainboard
  • STICKER NFC – NFC board
  • PYQ-1648-7053 – PIR sensor
  • ENC-STICKER-MOTION – Enclosure with two light pipes, PIR hole, and perforation
  • 2× ENERGIZER-AA-1.5V-LITHIUM